IBM Books

Software User's Guide Version 3.3

Index

Numerics
A B C D E F G H I K L M N O P Q R S T U V W X
Numerics
  • 2210
  • as boot server (3686)
    • A
  • accessing
  • protocol
  • configuration process (3469)
  • operating (monitor) process (3470)
  • second-level process (3435), (3446)
  • accessing the mp configuration prompt (4810)
  • accessing the mp monitoring commands (4815)
  • activate
  • GWCON command (3791)
  • activating spare interfaces (3792)
  • add
  • add (4876)
  • ATM configuration command (4301)
  • ATM Virtual Interface configuration command (4316)
  • Boot CONFIG command (3721)
  • BSC Relay configuration command (4917), (4919)
  • CONFIG command (3574)
  • ELS configuration command (3912)
  • Frame Relay configuration command (4556)
  • SDLC configuration command (4861)
  • SDLC monitoring command (4875)
  • SDLC Relay configuration command (4824), (4826)
  • X.25 configuration command (4405)
  • XTP configuration command (4446)
  • XTP monitoring command (4462)
  • add device example
  • multilink PPP (3458)
  • adding (3452)
  • dial-in circuit
  • example (3453)
  • dial-out circuit
  • example (3455)
  • multilink PPP circuit
  • example (3457)
  • address entries
  • changing (3724)
  • deleting (3732)
  • address registration in LAN emulation (4249)
  • address resolution in LAN emulation (4252)
  • address wildcards, DTE (4430)
  • addresses
  • ISDN (4997)
  • addresses, entering
  • ATM (4286)
  • advanced
  • ELS configuration command (3914)
  • ELS monitoring command (3976)
  • AppleTalk Control Protocol
  • for PPP (4698)
  • APPN HPR Control Protocol
  • for PPP (4726)
  • APPN ISR Control Protocol
  • for PPP (4729)
  • ARP configuration
  • config (4346)
  • list (4348)
  • remove (4349)
  • set (4347)
  • ATM
  • how to enter addresses (4287)
  • ATM addresses of LAN emulation components (4203)
  • ATM addressing (4200)
  • ATM configuration commands
  • accessing (4290)
  • add (4300)
  • disable (4312)
  • enable (4310)
  • interface (4298)
  • LE-Client (4294)
  • LE-Services (4295)
  • list (4302)
  • qos (4304)
  • remove (4306)
  • set (4308)
  • summary (4293)
  • ATM LLC monitoring command
  • list (4337)
  • ATM monitoring commands
  • accessing (4321)
  • atm-llc (4325)
  • interface (4323), (4327), (4335)
  • list (4329)
  • summary (4322)
  • trace (4331)
  • wrap (4333)
  • ATM network interface
  • monitoring (4288)
  • using (4285)
  • ATM Virtual Interface configuration commands
  • add (4315)
  • list (4317)
  • remove (4319)
  • summary (4314)
  • ATM Virtual Interface monitoring commands
  • summary (4339)
  • atm-llc
  • ATM monitoring commands (4326)
  • authentication
  • configuring PPP interface (4690)
  • remote device
  • configuring PPP interface to use (4692)
  • autobaud, setting (3656)
    • B
  • backup peer function, XTP (4433)
  • Backward Explicit Congestion Avoidance (4546)
  • Backward Explicit Congestion Notification (BECN)
  • Frame Relay (4499)
  • Banyan VINES Control Protocol (BVCP)
  • for PPP (4701)
  • basing configuration
  • on existing (3432)
  • baud rate, setting console (3654)
  • BCM (4268)
  • Support for IP (4269)
  • Support for IPX
  • BCM IPX Server Farm (4270)
  • preventing a LEC from being treated as (4271)
  • support for NetBIOS (4273)
  • NetBIOS Namesharing (4274)
  • support for Source Route Bridging (4275)
  • BCM IPX Server Farm
  • preventing a LEC from being treated as (4272)
  • benefits of LAN emulation (4182)
  • bilateral closed user groups
  • overview (4379)
  • binary synchronous communications relay (BRLY)
  • considerations (4907)
  • overview (4897)
  • sample configuration (4905)
  • boot
  • CONFIG command (3581)
  • GWCON command (3795)
  • Boot and dump configuration database
  • displaying (3746)
  • Boot CONFIG
  • process
  • entering from CONFIG (3582)
  • Boot CONFIG commands
  • add (3720)
  • change (3722)
  • copy (3725)
  • delete (3730)
  • describe (3733)
  • disable (3735)
  • enable (3738)
  • erase (3742)
  • list (3744)
  • load (3747)
  • store (3750)
  • summary (3719)
  • tftp (3754)
  • timedload (3752)
  • Boot CONFIG process
  • commands available from (3718)
  • description (3683)
  • entering (3717)
  • Boot directory (3710)
  • Boot file
  • copying into main memory (3749)
  • description of (3685)
  • boot options
  • B (boot) (3770)
  • BC (boot in Config-only Mode) (3771)
  • BM (boot using console queries) (3772)
  • BN (boot, But Do Not Run, Using Console Queries) (3773)
  • BP (boot using BOOTP) (3774)
  • CC (clear Configuration Memory) (3783)
  • D (Dump using stored configuration) (3776)
  • description of (3757)
  • DIAG (Execute IBM Extended Diagnostic Program) (3777)
  • DM (Dump using Console Queries) (3778)
  • LC (load Configuration Memory) (3782)
  • prompts (3768), (3769)
  • UB (Display TFTP boot Configuration) (3779)
  • UC (Display Hardware Configuration) (3780)
  • UG (go execute at address in RAM) (3781)
  • ZB (ZModem boot) (3784)
  • ZC (ZModem configuration memory load) (3785)
  • booting
  • accessing options (3765)
  • BOOTP (3759)
  • from TFTP (3762)
  • from the Integrated Boot Device (3758)
  • methods (3756)
  • option prompts (3766)
  • options (3764)
  • Unsuccessful BOOTP (3761)
  • booting, configuring (5096)
  • BOOTP
  • enabling/disabling (3691)
  • forwarding process (3689)
  • router as BOOTP Client (3690)
  • server (3693)
  • unsuccessful BOOTP (3775)
  • BOOTP Forwarding
  • description (3687)
  • BOOTP, configuring using quick configuration (5101)
  • Bootstrap protocol (3688)
  • breakpoint
  • OPCON command (3490)
  • Bridging Control Protocol (BCP)
  • for PPP (4704)
  • bridging, configuring using quick configuration (5072)
  • Broadcast and Unknown Server (4194), (4257) See also BUS
  • broadcast manager (4267)
  • BSC interface
  • configuring (4911)
  • BSC interface configuration commands
  • list (4930)
  • set (4934)
  • BSC Relay
  • accessing monitoring environment (4935)
  • configuration
  • combination multipoint (4902)
  • physical multipoint (4900), (4903)
  • point-to-point (4899)
  • virtual multipoint (4901), (4904)
  • configuring (4909), (4910)
  • considerations (4908)
  • overview (4898)
  • sample configuration (4906)
  • BSC Relay configuration commands
  • add (4918)
  • delete (4921)
  • disable (4924)
  • enable (4927)
  • list (4931)
  • summary of (4912)
  • BSC Relay monitoring commands
  • clear-port-statistics (4938)
  • disable (4940)
  • enable (4942)
  • list (4944)
  • summary of (4936)
  • buffer
  • GWCON command (3797)
  • BUS (4177), (4193)
  • connecting to (4256)
  • functions of (4260)
    • C
  • cable type, clocking and (4372)
  • call verification
  • ISDN (5003)
  • callback
  • dial circuit monitoring command (5060)
  • Callback Control Protocol (CBCP)
  • for PPP (4707)
  • calls
  • ISDN monitoring command (5032)
  • V.25bis monitoring commands (4960)
  • V.34 monitoring command (4984)
  • change
  • Boot CONFIG command (3723)
  • CONFIG command (3584)
  • Frame Relay configuration command (4567)
  • X.25 configuration command (4407)
  • XTP configuration command (4448)
  • channels
  • ISDN monitoring command (5034)
  • CHAP
  • authentication for PPP (4688)
  • configuration (4748)
  • monitoring (4776)
  • CIR
  • monitoring (4534), (4538)
  • orphan permanent virtual circuit CIR (4519)
  • relationship to VIR (4535)
  • Circuit congestion (4536)
  • responding with throttle down (4537)
  • circuit contention
  • ISDN (5000)
  • Circuit Information Rate (CIR) (4518)
  • circuits
  • ISDN monitoring command (5036)
  • V.25bis monitoring commands (4962)
  • V.34 monitoring commands (4986)
  • clear
  • BSC Relay monitoring command (4937)
  • CONFIG command (3590)
  • ELS configuration command (3916)
  • ELS monitoring command (3978)
  • Frame Relay monitoring command (4641)
  • GWCON command (3800)
  • PPP monitoring command (4777)
  • SDLC monitoring commands (4877)
  • clear-counters
  • LLC monitoring command (4147)
  • clear-port-statistics
  • SDLC Relay monitoring command (4844)
  • CLLM
  • description of (4515)
  • CLLM support (4547)
  • clock, setting and changing (3674)
  • clocking and cable type (4371)
  • closed user groups
  • configuring (4387)
  • cug 0 override (4385)
  • establishing X.25 circuits (4383)
  • extended
  • types of (4381)
  • overview (4377)
  • XTP support
  • overview (4438)
  • closing a telnet session (3548)
  • code installation (3713)
  • collisions
  • Ethernet monitoring command (4171)
  • command
  • exit (3422)
  • command history (3480), (3481)
  • commands
  • entering (3408)
  • environment
  • list (3615)
  • set (3617)
  • subcommands (3612)
  • Committed Burst Size
  • definition (4520)
  • relationship to maximum frame size (4521)
  • components of LAN emulation (4184)
  • CONFIG commands
  • add (3573)
  • boot (3580)
  • change (3583)
  • clear (3589)
  • delete (3592)
  • disable (3598)
  • disable-completion (3601)
  • enable (3603)
  • Enable-completion (3607)
  • environment (3609)
  • event (3619)
  • features (3622)
  • List (3629)
  • network (3636)
  • patch (3639)
  • protocol (3641)
  • qconfig (3648)
  • set (3650)
  • summary of (3572)
  • time (3672)
  • unpatch (3678)
  • update (3680)
  • CONFIG process
  • accessing (3436)
  • commands available from (3571)
  • description of (3550)
  • entering (3437), (3569)
  • exiting (3570)
  • Config-Only mode
  • description (3553)
  • entering automatically (3554)
  • manual entry (3555)
  • configuration
  • accessing the mp prompt (4812)
  • basing on existing (3429)
  • displaying information about (3804)
  • first (3427)
  • GWCON command (3803)
  • network interfaces (3462)
  • OPCON command (3451), (3496)
  • suggestions (3425)
  • updating (3430)
  • updating memory (3682)
  • configuration commands
  • GWCON prompt (3476)
  • multilink PPP protocol (mp) (4814)
  • set prompt-level
  • add prefix to hostname (3659)
  • configuration files
  • accessing (3697)
  • configuration load
  • validating (3702)
  • configuring
  • booting (5095)
  • DECnet (5093)
  • encryption (4772)
  • Ethernet (5068)
  • interfaces (5064)
  • IP (5075)
  • IPX (5083)
  • multilink PPP interface (4797)
  • for multi-chassis MP (4807)
  • on dial circuits (4798)
  • on Layer-2-Tunneling nets (4804)
  • on serial links (4801)
  • OPCON (3483)
  • PPP callback (4694)
  • user access (3561)
  • virtual connections (VC) (4739)
  • XTP (4444)
  • configuring Booting (3684)
  • configuring spare interfaces (3564)
  • activating (3793)
  • configuring (3565)
  • defining (4113)
  • restrictions (3567)
  • configuring the 2210 (3786)
  • Congestion monitoring (4539)
  • Congestion notification and avoidance
  • Backward Explicit Congestion Avoidance (4544)
  • Forward Explicit Congestion Avoidance (4543)
  • connecting to a process (3410)
  • connecting to the BUS (4258)
  • connection request timer (4435)
  • connector-Type
  • Ethernet configuration command (4161)
  • considerations
  • multilink PPP protocol (MP) (4791)
  • virtual connections (VC) (4736)
  • console
  • OPCON command (3498)
  • console baud rate, setting (3655)
  • console modem-control (5104)
  • consolidated link layer management (CLLM)
  • description of (4514)
  • coprocessor
  • accessing configuration process (3450)
  • copy
  • Boot CONFIG command (3726)
  • copy-config command
  • from a remote host (3728)
  • from a remote router (3727)
  • within a router (3729)
  • CPU
  • displaying memory usage of (3833)
  • create
  • ELS net filter configuration commands (3954)
  • ELS net filter monitoring commands (4050)
    • D
  • data direct VCCs (4263)
  • Data Link Connection Identifier (DLCI)
  • Frame Relay (4475), (4492)
  • date, setting and changing (3675)
  • DDN
  • default settings (5109)
  • debugging tool
  • entering (3492), (3494)
  • DECnet Control Protocol (DNCP)
  • for PPP (4710)
  • DECnet, configuring (5094)
  • default
  • ELS configuration command (3918)
  • delete
  • Boot CONFIG command (3731)
  • BSC Relay configuration command (4920), (4922)
  • CONFIG command (3593)
  • delete (4880)
  • dial circuit configuration command (5052)
  • ELS configuration command (3920)
  • ELS net filter configuration commands (3956)
  • ELS net filter monitoring commands (4052)
  • ISDN (3596)
  • SDLC configuration command (4863)
  • SDLC monitoring command (4879)
  • SDLC Relay configuration command (4827), (4829)
  • X.25 configuration command (4409)
  • XTP configuration command (4450)
  • XTP monitoring command (4464)
  • deleting configuration information (3591)
  • describe
  • Boot CONFIG command (3734)
  • description of OPCON (3485)
  • device
  • displaying time statistics about (3854)
  • exiting (3396)
  • OPCON command (3529)
  • rebooting (3525)
  • restart (3439)
  • restarting (3393)
  • device consoles
  • local (3380)
  • remote (3383)
  • using (3378)
  • device processes
  • attaching to (3539)
  • connecting to (3409)
  • displaying information about (3532)
  • device software
  • reloading (3526)
  • user interface (3379)
  • dial circuit configuration commands
  • delete (5053)
  • dial circuits on leased lines (5050)
  • encapsulator (5055)
  • list (5057)
  • set (5059)
  • summary of (5049)
  • dial circuit monitoring commands
  • callback (5061)
  • dial circuits
  • adding (4947), (4971), (5011)
  • configuring (4948), (4972), (5012)
  • configuring for MP (4799)
  • ISDN (4996)
  • dial circuits on leased lines (5051)
  • dial-in circuit
  • add device example (3454)
  • dial-in circuits
  • virtual connections (VC) (4734)
  • configuring (4740)
  • considerations (4737)
  • dial-out circuit
  • add device example (3456)
  • directories
  • boot and dump (3709)
  • disable
  • ATM configuration command (4313)
  • authentication protocols (4751)
  • Boot CONFIG command (3736)
  • BSC Relay configuration command (4923), (4925)
  • BSC Relay monitoring command (4939)
  • CONFIG command (3599)
  • data compression (4750)
  • ELS net filter configuration commands (3958)
  • ELS net filter monitoring commands (4054)
  • Frame Relay configuration command
  • cir-monitor (4571)
  • Frame Relay monitoring command (4643)
  • GWCON command (3808)
  • ISDN configuration command (5019)
  • Lower DTR (4752)
  • multilink protocol (4749)
  • performance configuration command (4080)
  • performance monitoring command (4092)
  • SDLC configuration command (4865)
  • SDLC link establishment connection (4881)
  • SDLC Relay configuration command (4830), (4832)
  • SDLC Relay monitoring command (4846)
  • X.25 configuration command (4395)
  • XTP configuration command (4454)
  • disable-completion
  • CONFIG command (3602)
  • display
  • ELS configuration command (3923)
  • ELS monitoring command (3980)
  • display hostname (3666)
  • display hostname software VPD (3670)
  • display hostname with carriage return (3671)
  • display hostname with changes (3667)
  • display hostname with date (3669)
  • display hostname with time (3668)
  • divert
  • OPCON command (3500)
  • DLCI (Data Link Connection Identifier)
  • Frame Relay (4477)
  • DOS
  • assembling a load file (5112)
  • disassembling a load file (5118)
  • DTE address wildcards (4429)
  • dump
  • Token-Ring monitoring command (4134)
  • dump file
  • description of (3708)
  • dumping
  • configuring for (3707)
  • duplicate policy values (4239)
  • dynamic routing
  • OSPF (5080)
  • RIP (5079)
    • E
  • EasyStart
  • using (3551)
  • EasyStart commands
  • pause (3519)
  • stop (3533)
  • EasyStart mode (3552)
  • ELAN name policy (4230)
  • ELAN type policy (4233)
  • ELS
  • capturing output using Telnet (3885)
  • concepts of (3868)
  • description of (3866)
  • entering (3621)
  • how to use (3883)
  • interpreting messages (3870)
  • message buffering
  • overview (3906)
  • monitoring (3908)
  • reloading (4013)
  • remote logging
  • additional considerations (3898)
  • duplicate logging (3902)
  • messages containing IP addresses (3900)
  • output (3896)
  • recurring sequence numbers (3904)
  • remote-logging (3945), (4019)
  • setting up traps (3886)
  • storing (4016)
  • tracing (3946), (4021)
  • trapping (4020), (4029)
  • troubleshooting example 1 (3888)
  • troubleshooting example 2 (3889)
  • troubleshooting example 3 (3890)
  • using to troubleshoot (3887)
  • ELS configuration
  • entering and exiting (3867)
  • ELS configuration commands
  • add (3911)
  • advanced (3913)
  • clear (3915)
  • default (3917)
  • delete (3919)
  • display (3922)
  • filter (3924)
  • list (3926)
  • message buffering (3963)
  • list (3965)
  • log (3967)
  • nolog (3969)
  • set (3971)
  • nodisplay (3928)
  • noremote (3931)
  • notrace (3934)
  • notrap (3936)
  • remote (3939)
  • set (3942)
  • summary of (3910)
  • trace (4024)
  • trap (3949)
  • ELS configuration environment
  • entering and exiting (3909)
  • ELS console environment
  • 2210 remote logging
  • configuration (3895)
  • level
  • defined (3892)
  • remote logging (3891)
  • remote workstation
  • configuration (3894)
  • syslog facility
  • defined (3893)
  • ELS messages (3879)
  • enabling logging to a remote file (Remote) (3941), (4005)
  • explanation (3876)
  • groups (3881)
  • logging level (3875)
  • managing rotation (3884)
  • network information (3880)
  • suppressing display of (3930)
  • suppressing display of (nodisplay) (3989)
  • suppressing remote log (noremote) (3933), (3992)
  • suppressing tracing (3995)
  • suppressing trapping (3938), (3999)
  • suppressing trapping of (notrap) (3998)
  • trace (3947)
  • tracing (4026)
  • trapping (3948), (4030)
  • ELS monitoring commands
  • advanced (3975)
  • clear (3977)
  • display (3979)
  • files (3981)
  • filter (3983)
  • list (3985)
  • message buffering (4059)
  • flush (4061)
  • list (4063)
  • log (4065)
  • nolog (4067)
  • set (4069)
  • tftp (4071)
  • view (4073)
  • nodisplay (3987)
  • noremote (3990)
  • notrace (3993)
  • notrap (3996)
  • remote (4003)
  • remove (4006)
  • restore (4009)
  • retrieve (4011)
  • save (4014)
  • set (4017)
  • statistics (4022)
  • summary (3974)
  • trap (4027)
  • view (4031)
  • ELS net filter configuration commands
  • create (3953)
  • delete (3955)
  • disable (3957)
  • enable (3959)
  • list (3961)
  • overview (3951)
  • ELS net filter monitoring commands
  • create (4049)
  • delete (4051)
  • disable (4053)
  • enable (4055)
  • list (4057)
  • overview (4047)
  • ELS operating environment
  • entering and exiting (3973)
  • enable
  • ATM configuration command (4311)
  • authentication protocols (4755)
  • Boot CONFIG command (3739)
  • BSC Relay configuration command (4926), (4928)
  • BSC Relay monitoring command (4941)
  • CHAP (4757)
  • CONFIG command (3604)
  • data compression (4754)
  • ELS net filter configuration commands (3960)
  • ELS net filter monitoring commands (4056)
  • Frame Relay configuration command (4588)
  • Frame Relay monitoring command (4648)
  • ISDN configuration command (5021)
  • Lower DTR (4758)
  • multilink protocol (4753)
  • PAP (4756)
  • performance configuration command (4082)
  • performance monitoring command (4094)
  • SDLC configuration command (4867)
  • SDLC monitoring command (4882)
  • SDLC Relay configuration command (4833), (4835)
  • SDLC Relay monitoring command (4848)
  • X.25 configuration command (4393)
  • XTP configuration command (4452)
  • enable lmi (4638)
  • Enable-completion
  • CONFIG command (3608)
  • enabling memory dump (3740)
  • enabling/disabling BOOTP forwarding (3692)
  • encapsulation type (5092)
  • encapsulator
  • dial circuit configuration command (5054)
  • encryption
  • configuring (4773)
  • end system identifier (4196)
  • environment
  • commands (3613)
  • list (3616)
  • set (3618)
  • CONFIG command (3610)
  • GWCON command (3811)
  • environment commands
  • summary of (3614)
  • environment, lower level
  • exiting (3419)
  • erase
  • Boot CONFIG command (3743)
  • error
  • GWCON command (3814)
  • ESI (4195)
  • Ethernet
  • configuring using quick configuration (5067)
  • displaying statistics (4154)
  • encapsulation type (5091)
  • encapsulation types for IPX (5090)
  • network interface
  • configuring (4155)
  • Ethernet configuration commands
  • accessing (4156)
  • connector-Type (4160)
  • ip-encapsulation (4162), (4350)
  • list (4164)
  • physical-address (4167)
  • summary (4159)
  • Ethernet monitoring commands (4172)
  • collisions (4170)
  • summary (4169)
  • Ethernet network interface
  • using (4153)
  • Ethernet operating commands
  • accessing (4168)
  • event
  • CONFIG command (3620)
  • GWCON command (3816)
  • OPCON command (3503)
  • event logging
  • subsystem (3872)
  • event number parameter (3874)
  • Events
  • Causes (3869)
  • Excess Burst Size
  • definition (4522)
  • setting for Frame Relay (4524)
  • exit (4915)
  • console command (4916)
  • exit command (3421)
  • exiting
  • lower level environments (3420)
  • exiting the device (3395)
    • F
  • fault
  • GWCON command (3818)
  • features (3624)
  • accessing configuration and console processes (3467)
  • Bandwidth reservation (3627)
  • bandwidth reservation (3822)
  • CONFIG command (3623)
  • Encoding subsystem (3628)
  • GWCON command (3820)
  • MAC filtering (3626), (3823)
  • WAN restoral (3821)
  • WAN restoral/reroute (3625)
  • files
  • ELS monitoring command (3982)
  • filter
  • ELS configuration command (3925)
  • ELS monitoring command (3984)
  • first
  • configuration (3428)
  • Flow control
  • packets (3798)
  • flush
  • OPCON command (3505)
  • forum-compliant LEC
  • ARP configuration (4345)
  • configuring a specific client (4344)
  • Forward Explicit Congestion Avoidance (4545)
  • Forward Explicit Congestion Notification (FECN)
  • Frame Relay (4497)
  • Forwarding process
  • example (3694)
  • Frame Relay (4480)
  • accessing configuration (4549)
  • Backward Explicit Congestion Notification (4498)
  • Bandwidth Reservation (4548)
  • circuit information rate (4517)
  • command/response (4494)
  • configuring (4550), (4553)
  • congestion notification and avoidance (4542)
  • Data Link Connection Identifier (DLCI) (4493)
  • data rates (4516)
  • discard eligibility (4500)
  • DLCI (Data Link Connection Identifier) (4476)
  • enabling PVC management (4551)
  • enabling SVC management (4552)
  • excess burst size (4523)
  • extended address (4495)
  • Forward Explicit Congestion Notification (4496)
  • frame format (4488)
  • frame forwarding described (4502)
  • HDLC flags (4490)
  • interface initialization (4479)
  • introduction (4469)
  • LAPD datalink protocol (4473), (4489)
  • line speed (4526)
  • LMI management entities (4506)
  • management status reporting (4511)
  • description (4510)
  • full status report (4512)
  • link integrity verification report (4513)
  • maximum information rate (4529)
  • minimum information rate (4527)
  • multicast emulation (4504)
  • network (4474)
  • network interface (4554), (4669)
  • network management (4505)
  • orphan permanent virtual circuits (4482)
  • orphan switched virtual circuits (4484)
  • permanent virtual circuits (4481)
  • protocol address mapping (4503)
  • PVCs and (4486)
  • required groups (4487)
  • static ARP (4560)
  • SVC
  • FRF 4 (4509)
  • user data (4501)
  • using (4468)
  • variable information rate (4531)
  • variable information rate (VIR) (4533)
  • virtual circuits (4471)
  • Frame Relay configuration commands (4570), (4587)
  • add (4557)
  • permanent-virtual-circuit (4558)
  • protocol-address (4559)
  • add protocol-address
  • IP protocol (4561)
  • add-protocol
  • AppleTalk2 protocol (4563)
  • DN protocol (4564)
  • IPX protocol (4562)
  • change (4566)
  • disable
  • cir-monitor (4572)
  • cllm (4573)
  • compression (4574)
  • congestion (4540)
  • congestion-monitor (4575)
  • dn-length-field (4576)
  • encryption (4577)
  • fragmentation (4578)
  • lmi (4579)
  • lower-dtr (4580)
  • multicast-emulation (4581)
  • no-pvc (4582)
  • notify-fecn-source (4583)
  • orphan-circuits (4584)
  • protocol-broadcast (4585)
  • throttle-transmit-on-fecn (4586)
  • enable
  • cir-monitor (4589)
  • cllm (4590)
  • compression (4591)
  • congestion (4541)
  • congestion-monitor (4592)
  • dn-length-field (4593), (4603)
  • encryption (4594)
  • lmi (4595)
  • lower-dtr (4596)
  • multicast-emulation (4597)
  • no-pvc (4599)
  • notify-fecn-source (4598)
  • orphan-circuits (4600)
  • protocol-broadcast (4601)
  • throttle-transmit-on-fecn (4602)
  • list (4611)
  • all (4605)
  • fragmentation-capable-pvcs (4606)
  • hdlc (4607)
  • lmi (4608)
  • permanent-virtual-circuits (4609)
  • protocol-address (4610)
  • llc (4615)
  • remove
  • permanent-virtual-circuit (4618)
  • protocol-address (4619)
  • remove protocol-address
  • Appletalk2 protocol (4622)
  • IP protocol (4620)
  • IPX protocol (4621)
  • remove-protocol
  • DN protocol (4623)
  • set
  • cable (4626)
  • clocking (4628)
  • default cir (4627)
  • frame-size (4629)
  • lmi-type (4630)
  • n1-parameter (4631)
  • n2-parameter (4632)
  • n3-parameter (4633)
  • p1-parameter (4634)
  • t1-parameter (4635)
  • transmit delay parameter (4636), (4637)
  • summary of (4555)
  • Frame Relay Forum Implementation Agreement 4 (FRF 4) (4508)
  • Frame Relay monitoring commands
  • clear (4640)
  • disable (4642)
  • cllm (4644)
  • notify-fecn-source (4645)
  • throttle-transmit-on-fecn (4646)
  • enable (4647)
  • cllm (4649)
  • notify-fecn-source (4650)
  • throttle-transmit-on-fecn (4651)
  • list (4652)
  • all (4654)
  • circuit (4655)
  • lmi (4656)
  • permanent-virtual-circuits (4657)
  • pvc-groups (4658)
  • llc (4662)
  • notrace (4664)
  • set (4665)
  • summary of (4639)
  • trace (4668)
  • Frame Relay permanent virtual circuits (PVC)
  • changing (4568)
  • Frame Relay switched virtual circuits (SVC) (4478)
  • adding (4565)
  • changing (4569)
  • listing (4612), (4613), (4659), (4660)
  • removing (4624)
  • functions of the BUS (4261)
    • G
  • getting help (3417), (4913)
  • group
  • deleting (3921)
  • group name parameter (3882)
  • GTE-Telenet
  • default settings (5108)
  • GWCON
  • commands
  • SDLC interface (4893)
  • X.25 interface (4423)
  • process
  • entering (3443)
  • GWCON commands
  • activate (3790)
  • boot (3794)
  • buffer (3796)
  • clear (3799)
  • configuration (3802)
  • disable (3807)
  • environment (3810)
  • error (3813)
  • event (3815)
  • fault (3817)
  • features (3819)
  • interface (3824), (4107)
  • log (3827)
  • memory (3831)
  • network (3835)
  • protocol (3838)
  • queue (3841)
  • reset (3843)
  • statistics (3845)
  • summary of (3789)
  • test (3848)
  • uptime (3852)
  • GWCON process
  • description of (3787)
  • entering and exiting (3788)
    • H
  • halt
  • OPCON command (3508)
  • HDLC flags
  • in Frame Relay frame (4491)
  • help
  • console command (3418), (4914)
  • how to list the protocols (3646)
    • I
  • I.430 switch variant (5013)
  • I.431 switch variant (5014)
  • IBD
  • file transfer considerations (3700)
  • filename definitions (3698)
  • IBD boot
  • configuring using quick configuration (5103)
  • IBM 2210
  • Config-Only mode (3556)
  • identifying prompts (3416)
  • ILMI functions in LAN emulation (4206)
  • image
  • loading at specific time (3705)
  • installing software/code (3712)
  • intercept
  • OPCON command (3511)
  • intercept character (3424)
  • changing (3512)
  • interface
  • ATM configuration command (4299)
  • ATM monitoring commands (4324), (4328), (4336)
  • GWCON command (3825)
  • list of processes (3406)
  • user (3401)
  • interface device
  • adding (3576)
  • changing (3585)
  • interfaces
  • configuring spare (3566)
  • spare (4114)
  • interfaces, configuring (5065)
  • interfaces, restrictions (3568)
  • Interim Local Management Interface (4207) See also ILMI functions in LAN emulation
  • IP
  • TFTP (3695)
  • IP (Internet Protocol), configuring using quick configuration (5078)
  • IP Control Protocol (IPCP)
  • for PPP (4713)
  • IP monitoring commands
  • ping (3521)
  • IP, configuring (5076)
  • ip-encapsulation
  • Ethernet configuration command (4163), (4351)
  • IPv6 Control Protocol (IPv6CP)
  • for PPP (4717)
  • IPX (Internetwork Packet Exchange)
  • configuring using quick configuration (5086)
  • Ethernet encapsulation types (5089)
  • token ring encapsulation types (5087)
  • IPX Control Protocol (IPXCP)
  • for PPP (4720)
  • IPX, configuring (5084)
  • ISDN
  • accessing monitoring process (5030)
  • addresses (4998)
  • call verification (5002)
  • configuring (5010), (5016)
  • cost control over demand circuits (5001)
  • delete address (3595)
  • dial circuit contention (4999)
  • dial circuits (4995)
  • GWCON commands (5048)
  • interface restrictions (5008)
  • overview (4994)
  • PPP configuration (5009)
  • requirements and restrictions (5005)
  • sample configurations (5004)
  • switches supported (5006), (5007)
  • ISDN configuration commands
  • disable (5018)
  • enable (5020)
  • list (5023)
  • remove (5024)
  • set (5027)
  • set switch variant (5028)
  • summary of (5017)
  • ISDN interface
  • using (4993)
  • ISDN monitoring commands
  • calls (5033)
  • channels (5035)
  • circuits (5037)
  • L2_Counters (5039)
  • L3_Counters (5041)
  • parameters (5045)
  • statistics (5047)
  • summary of (5031)
  • TEI (5043)
    • K
  • keepalive timer, setting for XTP (4458)
  • key parameters for LAN emulation (4284)
    • L
  • L2_Counters
  • ISDN monitoring command (5038)
  • L3_Counters
  • ISDN monitoring command (5040)
  • LAN destination policy (MAC address policy) (4226)
  • LAN emulation (4173)
  • address registration to the LES (4250)
  • address resolution by the LES (4253)
  • addressing in ATM (4198)
  • ATM addresses of LAN emulation components (4201)
  • ATM addressing for (4199)
  • benefits (4181)
  • Broadcast and Unknown Server (BUS) (4191)
  • Broadcast Manager (BCM) (4266)
  • BUS (4192)
  • client (4189)
  • components (4183)
  • components, ATM addresses of (4202)
  • configuration of the signaling version (4208)
  • configuration server (4188)
  • configuration server, policies and policy values (4219)
  • connecting to the BUS (4255)
  • connecting to the LES (4246)
  • ELAN name policy (4232)
  • ELAN type policy (4235)
  • establishing data direct VCCs (4262)
  • functions of the BUS (4259)
  • ILMI functions, related (4205)
  • key configuration parameters (4282)
  • LAN Emulation Configuration Server, overview of (4214)
  • LECS duplicate policy values (4241)
  • LECS LAN destination policy (MAC address policy) (4229)
  • LECS TLVs (4245)
  • LECS, overview of (4213)
  • LECS, policies and policy values (4218)
  • locating the LECS using ILMI (4211)
  • max frame size policy (4238)
  • overview (4179)
  • overview of related ILMI functions (4204)
  • overview of router extensions for LAN emulation (4264)
  • redundancy (4278)
  • reliability (4276)
  • sample assignment policies for LECS (4224)
  • security (4280)
  • server (4190)
  • signaling version (4209)
  • LAN Emulation Client (LEC) (4340)
  • configuring (4341), (4342)
  • LAN Emulation Configuration Server (4216) See also LECS
  • LAN Emulation Server (4248) See also LES
  • layer 2 tunneling
  • relationship with multilink PPP (MP) (4796)
  • Layer 2 Tunneling nets
  • configuring for MP (4805)
  • LE client (4186)
  • LE-Client
  • ATM configuration command (4297)
  • LE-Services
  • ATM configuration command (4296)
  • LEC monitoring commands
  • accessing (4357)
  • list (4360)
  • mib (4362)
  • summary of (4359)
  • LECS (4175)
  • and LAN emulation (4185)
  • and LAN extensions (4217)
  • component of LAN emulation (4215)
  • duplicate policy values (4240)
  • ELAN name policy (4231)
  • ELAN type policy (4234)
  • LAN destination policy (MAC address policy) (4227)
  • max frame size policy (4237)
  • sample assignment policies (4225)
  • TLVs (4243)
  • LES (4176), (4187)
  • address registration (4251)
  • address resolution (4254)
  • connecting to (4247)
  • Line Speed (4525)
  • Link Control Protocol (LCP)
  • packets (4682)
  • relationship to PPP (4680)
  • list (3472)
  • ATM configuration command (4303)
  • ATM LLC monitoring command (4338)
  • ATM monitoring commands (4330)
  • ATM Virtual Interface configuration command (4318)
  • Boot CONFIG command (3745)
  • BSC interface configuration command (4929)
  • BSC Relay configuration command (4932)
  • BSC Relay monitoring command (4943)
  • CONFIG command (3630)
  • dial circuit configuration command (5056)
  • ELS configuration command (3927)
  • ELS monitoring command (3986)
  • ELS net filter configuration commands (3962)
  • ELS net filter monitoring commands (4058)
  • Ethernet configuration command (4165)
  • Frame Relay configuration command (4604)
  • Frame Relay monitoring command (4653)
  • ISDN configuration command (5022)
  • LEC monitoring command (4361)
  • list (4885)
  • LLC configuration command (4353)
  • LLC monitoring command (4149), (4365)
  • performance configuration command (4084)
  • performance monitoring command (4096)
  • Point-to-Point configuration command (4759)
  • PPP monitoring command (4779)
  • SDLC configuration command (4869)
  • SDLC monitoring command (4884)
  • SDLC Relay configuration command (4836), (4839)
  • SDLC Relay monitoring command (4850)
  • Token-Ring configuration command (4118)
  • V.25bis configuration command (4954)
  • V.34 configuration command (4978)
  • X.25 configuration command (4411)
  • X.25 monitoring command (4415)
  • XTP configuration command (4460)
  • XTP monitoring command (4466)
  • list devices (4291)
  • list devices command (3459), (4157), (4744), (4951), (4975)
  • listing the configuration (3645)
  • llc
  • Frame Relay configuration commands (4614), (4616)
  • Frame Relay monitoring commands (4661)
  • Point-to-Point configuration command (4764)
  • PPP configuration commands (4766)
  • PPP monitoring commands (4787), (4789)
  • Token-Ring configuration command (4120)
  • Token-Ring configuration commands (4122), (4138)
  • Token-Ring monitoring command (4136)
  • LLC configuration commands
  • accessing (4141)
  • list (4143), (4354)
  • set (4144), (4356)
  • summary (4142), (4352), (4364)
  • LLC monitoring commands
  • accessing (4145)
  • clear-counters (4148)
  • list (4150), (4366)
  • set (4152), (4368)
  • summary (4146)
  • LLC network interfaces
  • configuring (4140)
  • LMI management entities (4507)
  • load
  • Boot CONFIG command (3748)
  • load file, router
  • assembling under DOS (5114)
  • assembling under UNIX (5117)
  • creating from multiple disks (5111)
  • disassembling under DOS (5120)
  • disassembling under UNIX (5123)
  • loading
  • at specific time (3704)
  • loading software/code onto the 2210 (3715)
  • local consoles (3382)
  • local terminals (3381)
  • local XTP
  • description (4436)
  • locating the LECS using ILMI (4212)
  • log
  • GWCON command (3828)
  • logging in
  • from local console (3390)
  • from remote console (3389)
  • remote login name (3388)
  • logging level
  • changing (3830)
  • viewing (3829)
  • login
  • disabling (3600)
  • enabling (3605)
  • logout
  • OPCON command (3514)
    • M
  • MAC address policy (LAN destination policy) (4228)
  • magic numbers (3703)
  • max frame size policy (4222), (4236)
  • maximum information rate
  • for frame relay (4530)
  • memory
  • displaying information about (3834)
  • erasing information (4008)
  • GWCON command (3832)
  • obtaining information about (3518)
  • OPCON command (3517)
  • memory dump
  • disabling (3737)
  • enabling (3741)
  • message buffering
  • ELS configuration commands (3964)
  • list (3966)
  • log (3968)
  • nolog (3970)
  • set (3972)
  • ELS monitoring commands (4060)
  • flush (4062)
  • list (4064)
  • log (4066)
  • nolog (4068)
  • set (4070)
  • tftp (4072)
  • view (4074)
  • overview (3907)
  • messages
  • explanation (3877)
  • interpreting (3871)
  • receiving (3865)
  • messaging process
  • commands affecting (3858)
  • description of (3856)
  • entering and exiting (3862)
  • OPCON commands (3860)
  • receiving messages (3864)
  • mib
  • LEC monitoring command (4363)
  • minimum information rate
  • for frame relay (4528)
  • Modem
  • enabling (3606)
  • monitoring
  • accessing the mp commands (4817)
  • ATM (4289)
  • network interfaces (3466)
  • performance monitoring commands (4090)
  • monitoring commands
  • LAN Emulation Client (LEC) (4343)
  • multilink ppp protocol (mp) (4819)
  • MONITR process
  • commands affecting (3857)
  • description of (3855)
  • entering and exiting (3861)
  • OPCON commands (3859)
  • receiving messages (3863)
  • MOS system debugging tool
  • entering (3491), (3493)
  • MPPE options
  • listing (4762)
  • MS-CHAP
  • authentication for PPP (4689)
  • msgsz
  • SDLC monitoring command (4888)
  • multi-chassis MP (4795)
  • configuring (4808)
  • multilink PPP protocol (MP)
  • configuration commands (4813)
  • configuring
  • dial circuits (4800)
  • Layer 2 Tunneling nets (4806)
  • multi-chassis MP (4809)
  • serial links (4803)
  • considerations (4792)
  • monitoring commands (4818)
  • multi-chassis (4793)
  • overview (4790)
  • relationship with layer 2 tunneling (4794)
  • multilink PPP protocol (mp) monitoring commands
  • accessing (4816)
  • multilink protocol (mp) configuration prompt
  • accessing (4811)
    • N
  • national disable
  • X.25 configuration command (4399)
  • national enable
  • X.25 configuration command (4397)
  • national personality, setting (4441)
  • national restore
  • X.25 configuration command (4403)
  • national set
  • X.25 configuration command (4401)
  • network
  • CONFIG command (3637)
  • environment (3638), (3837)
  • GWCON command (3836)
  • network command (3460), (4158), (4292), (4358), (4745) , (4952), (4976)
  • Network Control Protocols (NCP)
  • for PPP interfaces (4696)
  • AppleTalk Control Protocol (4700)
  • APPN HPR Control Protocol (4728)
  • APPN ISR Control Protocol (4731)
  • Banyan VINES Control Protocol (BVCP) (4703)
  • Bridging Control Protocol (BCP) (4706)
  • Callback Control Protocol (CBCP) (4709)
  • DECnet Control Protocol (DNCP) (4712)
  • IP Control Protocol (IPCP) (4716)
  • IPv6 Control Protocol (IPv6CP) (4719)
  • IPX Control Protocol (IPXCP) (4722)
  • OSI Control Protocol (OSICP) (4725)
  • network interface
  • accessing configuration process (3449)
  • accessing console process (3464)
  • configuring (3448), (4101), (4104), (4110)
  • console process (3447), (4103), (4109)
  • deleting (3594)
  • disabling (3809)
  • displaying information about (3631), (3806), (3826)
  • displaying the configuration (3461)
  • enabling (3851)
  • GWCON interface command (4108)
  • monitoring (3465), (4102)
  • SDLC (4895)
  • supported interfaces (3463)
  • verifying (3850)
  • X.25 (4424)
  • network software
  • displaying statistical information about (3847)
  • nodisplay
  • ELS configuration command (3929)
  • ELS monitoring command (3988)
  • nonvolatile configuration memory
  • replacing (3586)
  • noremote
  • ELS configuration command (3932)
  • ELS monitoring command (3991)
  • notrace
  • ELS configuration command (3935)
  • ELS monitoring command (3994)
  • Frame Relay monitoring commands (4663)
  • notrap
  • ELS configuration command (3937)
  • ELS monitoring command (3997)
    • O
  • obtaining status of telnet session (3545)
  • off
  • packet trace monitoring command (4034)
  • on
  • packet trace monitoring command (4036)
  • online help (3478), (3479)
  • OPCON commands
  • breakpoint (3489)
  • configuration (3495)
  • console (3497)
  • divert (3499)
  • event (3502)
  • flush (3504)
  • halt (3507)
  • intercept (3510)
  • logout (3513)
  • memory (3516)
  • reload (3523)
  • restart (3527)
  • status (3530)
  • summary of (3487)
  • suspend (3535)
  • talk (3537)
  • telnet (3540)
  • OPCON interface
  • configuring (3482)
  • OPCON process
  • accessing (3486)
  • commands available from (3488)
  • description (3484)
  • getting back to (3423)
  • summary (3399)
  • orphan permanent virtual circuits
  • Frame Relay (4483)
  • orphan switched virtual circuits
  • Frame Relay (4485)
  • OSI Control Protocol (OSICP)
  • for PPP (4723)
  • OSPF (5082)
  • output
  • discarding (3506)
  • sending to other consoles (3501)
  • suspending (3509)
  • overview
  • binary synchronous communications relay (BRLY) (4896)
  • ELS net filter configuration commands (3952)
  • ELS net filter monitoring commands (4048)
  • of software (3398)
  • virtual connections (VC) (4733)
  • overview of LAN emulation (4180)
    • P
  • packet completion codes (3878)
  • packet forwarder
  • entering CONFIG environment for (3643)
  • packet trace
  • packet trace monitoring command (4001)
  • packet trace messages
  • tracing packets (4002)
  • packet trace monitoring commands
  • off (4033)
  • on (4035)
  • packet Trace (4000)
  • reset (4037)
  • set (4039)
  • subsystems (4041)
  • trace-status (4043)
  • view (4045)
  • packet-size
  • Token-Ring configuration command (4123)
  • PAP authentication for PPP (4687)
  • parameter defaults
  • X.25 (4375)
  • parameters
  • configuring (3652)
  • event number (3873)
  • for LAN emulation (4283)
  • ISDN monitoring command (5044)
  • key LAN emulation (4178)
  • V.25bis monitoring commands (4964)
  • V.34 monitoring commands (4988)
  • X.25 monitoring command (4417)
  • password, setting for user (3579)
  • passwords (3387)
  • patch
  • CONFIG command (3640)
  • pause
  • EasyStart command (3520)
  • perf command (4077)
  • performance
  • configuring (4075)
  • performance configuration commands
  • disable (4079)
  • enable (4081)
  • list (4083)
  • set (4085)
  • summary (4078)
  • performance monitoring commands
  • accessing (4087)
  • disable (4091)
  • enable (4093)
  • list (4095)
  • report (4097)
  • set (4099)
  • summary of (4089)
  • physical-address
  • Ethernet configuration command (4166)
  • pin parameter
  • setting (3944)
  • ping
  • IP monitoring command (3522)
  • Point-to-Point configuration commands
  • accessing (4746)
  • list (4760)
  • LLC (4765)
  • summary of (4747)
  • Point-to-Point interfaces
  • configuring (4741)
  • Point-to-Point network interface
  • using (4670)
  • Point-to-Point Protocol (PPP) (4714)
  • accessing the configuration process (4742)
  • address fields (4674)
  • AppleTalk Control Protocol (4699)
  • APPN HPR Control Protocol (4727)
  • APPN ISR Control Protocol (4730)
  • authentication (4686)
  • Banyan Vines Control Protocol (BVCP) (4702)
  • Bridging Control Protocol (BCP) (4705)
  • Callback Control Protocol (CBCP) (4708)
  • control field (4675)
  • DECnet Control Protocol (DNCP) (4711)
  • flag fields (4673)
  • frame check sequence field (4678)
  • frame structure (4672)
  • information field (4677)
  • IPv6 Control Protocol (IPv6CP) (4718)
  • IPX Control Protocol (IPXCP) (4721)
  • LCP packets (4681)
  • Link Control Protocol (LCP) (4679)
  • link establishment packets (4683)
  • link maintenance packets (4685)
  • link termination packets (4684)
  • Network Control Protocols (NCP) (4697)
  • OSI Control Protocol (OSICP) (4724)
  • overview (4671)
  • protocol field (4676)
  • policies (4174)
  • agreement of (4223)
  • policies and policy values (4220)
  • PPP
  • IP Control Protocol (IPCP) (4715)
  • PPP callback
  • configuring (4695)
  • PPP configuration commands
  • list
  • ccp (4761)
  • ecp (4763)
  • set (4768)
  • setting IPCP parameters (4769)
  • setting LCP parameters (4770)
  • PPP interface monitoring process
  • accessing (4774)
  • PPP monitoring commands
  • clear (4778)
  • list (4780)
  • dn (4784)
  • dncp (4783)
  • osi (4786)
  • osicp (4785)
  • listing IPCP parameters (4781)
  • listing LCP parameters (4782)
  • llc (4788)
  • summary of (4775)
  • process
  • second-level
  • accessing (3433), (3444)
  • processes
  • communicating with (3405)
  • list of (3404)
  • prompt-level
  • additional functions of
  • display hostname with carriage return (3665)
  • display hostname with changes (3661)
  • display hostname with date (3663)
  • display hostname with time (3662)
  • display hostname with VPD (3664)
  • configuration command
  • add prefix to hostname (3658)
  • display hostname (3660)
  • prompts
  • boot options (3767)
  • CONFIG (3414)
  • device processes (3411)
  • GWCON (3413)
  • identifying (3415)
  • OPCON (3412)
  • protocol
  • CONFIG command (3642)
  • configuration process (4105), (4111)
  • console process (4106), (4112)
  • entering configuration process (3471)
  • GWCON command (3839)
  • protocol command (3473), (3477)
  • protocol console process
  • entering (3475)
  • protocols
  • configuration and console processes
  • accessing (3468)
  • configuring using quick configuration (5074)
  • console process (3442)
  • displaying information about (3805)
  • entering configuration environment for (3644)
  • entering console process (3474)
  • generating a list of (3647)
    • Q
  • qconfig
  • CONFIG command (3649)
  • QoS
  • ATM configuration command (4305)
  • queue
  • GWCON command (3842)
  • Quick Config mode (3558)
  • automatic entry (3559)
  • manual entry (3560)
  • quick configuration (3407), (3438)
  • boot configuration
  • BOOTP user interface (5100)
  • IBD user interface (5102)
  • procedure (5097)
  • TFTP user interface (5098)
  • bridging configuration (5071)
  • description (3557)
  • device configuration (5066)
  • protocol configuration
  • IP user interface (5077)
  • IPX user interface (5085)
  • procedure (5073)
  • Quick Configuration Reference (5062)
    • R
  • redundancy of LAN emulation servers (4279)
  • reliability of LAN emulation (4277)
  • reload
  • OPCON command (3524)
  • remote
  • ELS configuration command (3940)
  • ELS monitoring command (4004)
  • remote consoles (3384)
  • remote device
  • authentication
  • configuring PPP interface for (4691)
  • configuring PPP interface to use (4693)
  • remote DTE, searching for (4434)
  • remote logging
  • additional considerations (3899)
  • duplicate logging (3903)
  • messages containing IP addresses (3901)
  • recurring sequence numbers (3905)
  • output examples (3897)
  • remote login (3391)
  • remote terminals (3385)
  • remove
  • ATM configuration command (4307)
  • ATM Virtual Interface configuration command (4320)
  • ELS monitoring command (4007)
  • Frame Relay configuration command (4617)
  • ISDN configuration command (5025)
  • report
  • performance monitoring command (4098)
  • reset
  • GWCON command (3844)
  • packet trace monitoring command (4038)
  • X.25 monitoring command (4419)
  • Restart
  • restart
  • OPCON command (3441)
  • OPCON command (3394), (3528)
  • restarting the device (3392), (3440)
  • restarting the router (5105)
  • restore
  • ELS monitoring command (4010)
  • retrieve
  • ELS monitoring command (4012)
  • RIP (5081)
  • route descriptor policy (4221)
  • router
  • displaying information about (3632)
  • router extensions for LAN emulation (4265)
  • router load file
  • assembling under DOS (5113)
  • assembling under UNIX (5116)
  • creating from multiple disks (5110)
  • disassembling under DOS (5119)
  • disassembling under UNIX (5122)
  • router software
  • communicating with (3840)
  • router software installation (3714)
  • router, restarting (5106)
    • S
  • sample, quick configuration (5063)
  • save
  • ELS monitoring commands (4015)
  • SDLC
  • accessing configuration (4858)
  • configuration procedure (4853)
  • configuration requirements (4856)
  • configuring (4852), (4857)
  • network interface (4894)
  • switched call-in interface
  • configuring (4854)
  • SDLC configuration commands
  • add (4862)
  • delete (4864)
  • disable (4866)
  • enable (4868), (4883)
  • list (4870)
  • msgsz (4889)
  • set (4872)
  • summary of (4859)
  • SDLC connections
  • support for (4860)
  • SDLC monitoring commands
  • accessing (4873)
  • clear (4878)
  • link counters (4887)
  • list (4886)
  • summary of (4874)
  • SDLC Relay
  • accessing configuration (4822)
  • accessing monitoring environment (4842)
  • configuring (4820), (4821)
  • SDLC Relay configuration commands
  • add (4825)
  • delete (4828)
  • disable (4831)
  • enable (4834)
  • list (4837), (4838)
  • set (4841)
  • summary of (4823)
  • SDLC Relay monitoring commands
  • clear-port-statistics (4845)
  • disable (4847)
  • enable (4849)
  • list (4851)
  • summary of (4843)
  • second-level
  • process
  • accessing (3434), (3445)
  • security of LAN emulation (4281)
  • selector (4197)
  • serial line interface
  • accessing the configuration process (4370)
  • serial line interfaces
  • configuring (4369)
  • serial PPP links
  • configuring for MP (4802)
  • session
  • terminating (3515)
  • set
  • ATM configuration command (4309)
  • BSC interface configuration command (4933)
  • CONFIG command (3651)
  • dial circuit configuration command (5058)
  • ELS configuration command (3943)
  • ELS monitoring command (4018)
  • Frame Relay configuration command (4625)
  • Frame Relay monitoring command (4666)
  • ISDN configuration commands (5026)
  • LLC configuration command (4355)
  • LLC monitoring command (4151), (4367)
  • packet trace monitoring command (4040)
  • performance configuration command (4086)
  • performance monitoring command (4100)
  • PPP configuration command (4767)
  • SDLC configuration command (4871)
  • SDLC monitoring command (4890)
  • SDLC Relay configuration command (4840)
  • Token-Ring configuration command (4125)
  • V.25bis configuration command (4956)
  • V.34 configuration command (4980)
  • X.25 configuration command (4391)
  • XTP configuration command (4456)
  • setting and changing time, date, and clock (3676)
  • setting autobaud (3657)
  • setting console baud rate (3653)
  • signaling version configuration in LAN emulation (4210)
  • software
  • installing (3711)
  • overview (3397)
  • user interface (3400)
  • software installation (3716)
  • source-routing
  • Token-Ring configuration command (4127)
  • speed
  • Token-Ring configuration command (4130)
  • SRAM device records
  • recreating (3575)
  • statistics
  • clearing (3801)
  • ELS monitoring command (4023)
  • GWCON command (3846)
  • ISDN monitoring command (5046)
  • V.25bis monitoring commands (4966)
  • V.34 monitoring commands (4990)
  • X.25 monitoring command (4421)
  • status
  • OPCON command (3531), (4743)
  • stop
  • EasyStart command (3534)
  • store
  • Boot CONFIG command (3751)
  • subsystems
  • packet trace monitoring command (4042)
  • suggestions
  • configuration (3426)
  • suspend
  • OPCON commands (3536)
  • switch variant (5015)
  • setting for ISDN (5029)
  • switched SDLC call-in interface
  • configuring (4855)
    • T
  • talk
  • OPCON command (3538), (4076), (4088)
  • TCP/IP, transporting X.25 traffic over (4426)
  • TDM (time division multiplexing) (4470)
  • technical support access (3563)
  • TEI
  • ISDN monitoring command (5042)
  • telnet
  • closing a connection (3546)
  • obtaining status of Telnet session (3543)
  • OPCON command (3541)
  • quitting a session (3547)
  • telnet command (3542)
  • telnet connections (3386)
  • closing (3549)
  • obtaining status of (3544)
  • Temperature thresholds (3812)
  • temperature thresholds (3611)
  • test
  • GWCON command (3849)
  • SDLC monitoring commands (4891)
  • test (4892)
  • TFTP
  • tftp
  • Boot CONFIG command (3755)
  • booting from (3763)
  • description of (3696)
  • IBD considerations (3701)
  • to and from IBD (3699)
  • TFTP boot, configuring using quick configuration (5099)
  • time
  • activated load of image (3706)
  • CONFIG command (3673)
  • setting and changing (3677)
  • timedload
  • Boot CONFIG command (3753)
  • Tinygram compression (4771)
  • TLVs
  • defined on an ELAN basis (4242)
  • Token Ring
  • token ring
  • configuring using quick configuration (5070)
  • encapsulation types for IPX (5088)
  • Token-Ring configuration commands
  • accessing (4116)
  • enabling for LLC (4129)
  • list (4119)
  • LLC (4121)
  • llc (4137)
  • packet-size (4124)
  • set (4126)
  • source-routing (4128)
  • speed (4131)
  • summary of (4117)
  • Token-Ring Interface
  • statistics displayed for (4139)
  • Token-Ring monitoring commands
  • accessing (4132)
  • dump (4135)
  • summary of (4133)
  • Token-Ring network interfaces
  • configuring (4115)
  • trace
  • ATM monitoring commands (4332)
  • ELS configuration commands (4025)
  • Frame Relay monitoring commands (4667)
  • trace-status
  • packet trace monitoring command (4044)
  • trap
  • ELS configuration commands (3950)
  • ELS monitoring command (4028)
  • type length values (4244) See also TLVs
    • U
  • UNIX
  • assembling a load file (5115)
  • disassembling a load file (5121)
  • unpatch
  • CONFIG command (3679)
  • unsuccessful BOOTP (3760)
  • update
  • CONFIG command (3681)
  • updating
  • configuration (3431)
  • uptime
  • GWCON command (3853)
  • user access
  • adding user (3577)
  • changing password (3587)
  • changing user (3588)
  • configuring (3562)
  • deleting user (3597)
  • listing user information (3633)
  • setting password (3578)
  • user interface
  • processes (3403)
  • software (3402)
    • V
  • V.25bis
  • accessing configuration (4950)
  • accessing monitoring process (4958)
  • adding addresses (4946)
  • configuring (4945), (4949)
  • GWCON commands (4968)
  • V.25bis configuration commands
  • list (4955)
  • set (4957)
  • summary of (4953)
  • V.25bis monitoring commands
  • calls (4961)
  • circuits (4963)
  • parameters (4965)
  • statistics (4967)
  • summary of (4959)
  • V.34
  • accessing configuration (4974)
  • accessing monitoring process (4982)
  • adding addresses (4970)
  • configuring (4969), (4973)
  • GWCON commands (4992)
  • V.34 configuration commands
  • list (4979)
  • set (4981)
  • summary of (4977)
  • V.34 monitoring commands
  • calls (4985)
  • circuits (4987)
  • parameters (4989)
  • statistics (4991)
  • summary of (4983)
  • V25bis address (3634)
  • V34 address (3635)
  • variable information rate
  • for frame relay (4532)
  • VCs
  • Frame Relay (4472)
  • view
  • ELS monitoring command (4032)
  • packet trace monitoring command (4046)
  • virtual connections (VC)
  • configuring (4738)
  • considerations (4735)
  • overview (4732)
    • W
  • WANs, configuring using quick configuration (5069)
  • wildcards, DTE address (4431)
  • wrap
  • ATM monitoring commands (4334)
    • X
  • X.25
  • parameter defaults (4376)
  • X.25 configuration commands
  • add (4406)
  • change (4408)
  • delete (4410)
  • disable (4396)
  • enable (4394)
  • list (4412)
  • national disable (4400)
  • national enable (4398)
  • national restore (4404)
  • national set (4402)
  • set (4392)
  • summary of (4390)
  • X.25 interfaces
  • bilateral closed user groups
  • overview (4380)
  • closed user groups
  • configuring (4388)
  • establishing circuits (4384)
  • extended types (4382)
  • overriding processing for cug 0 (4386)
  • overview (4378)
  • X.25 monitoring commands
  • list (4416)
  • parameters (4418)
  • reset (4420)
  • statistics (4422)
  • summary of (4414)
  • X.25 network interface
  • accessing the monitoring process (4413)
  • configuring (4389)
  • national personality (4374), (5107)
  • statistics (4425)
  • using (4373)
  • X.25 Transport Protocol (XTP) (4427) See also XTP
  • XTP
  • backup peer function (4432)
  • closed user groups
  • overview (4439)
  • configuration commands
  • Add (4447)
  • Change (4449)
  • Delete (4451)
  • Disable (4455)
  • Enable (4453)
  • List (4461)
  • Set (4457)
  • configuration procedures (4440)
  • configuring (4443)
  • configuring commands (4445)
  • local XTP
  • description (4437)
  • monitoring commands
  • Add (4463)
  • Delete (4465)
  • List (4467)
  • setting keepalive timer (4459)
  • setting natioinal personality (4442)
  • using (4428)

    • [ Top of Page | Previous Page | Table of Contents | Index ]